Implementation of reengineering technology to ensure the predefined geometric accuracy of a light aircraft keel

The subject of this research is the technology of reengineering and control of parts of aircraft objects (AOs) and technological equipment for their manufacture. The predefined accuracy of the keel of a light aircraft and molding surfaces of technological equipment for its manufacture has been ensured by using reengineering technology and CAD systems. A portrait of the actual physically existing keel of a light aircraft was built in the *.stl file format using the software Artec Studio (USA). The control and comparison of the geometry of the shapes of the analytical standard with the actual physically existing keel of a light aircraft based on its portrait have been implemented. The methods used are the analysis and synthesis of the experimental geometry of shapes, the method of expert evaluations. The following results were obtained: based on the analysis and synthesis, the presence of significant errors in the accuracy of the manufacture of the keel for a light aircraft in the range from −5.26 mm to +5.39 mm was detected. It has been shown that the key factor is the keel's relative plane indicator, which is outside the tolerance margin and is 85 %. It was decided to fabricate new technological equipment from another material – organic plastics. Control of the technological equipment made from organic plastics for the keel of a light aircraft showed that the shape-forming surfaces of the equipment have appropriate shapes and sizes corresponding to the existing analytical standard and are devoid of inaccuracies that occurred in the previous version. The range of keel margins that was made using the new technological equipment from organic plastics is from –0.51 mm to +0.34 mm while the relative plane of the keel outside the tolerance margin does not exceed 15 %. The study results showed the adequacy of the decisions taken, ensuring the predefined accuracy for the keel of a light aircraft and molding surfaces of technological equipment for its manufacture