CFD validation of performance improvement of a 500 kW Francis turbine

Conventionally assessing of turbine performance was done by conducting model experiments which at times become costly and time consuming for several design alternatives in design optimization. Recently, computational fluid dynamics (CFD) has become a more cost effective tool for predicting detailed flow information in turbine space to enable the selection of the best design. With the growth of computational mechanics, the virtual hydraulic machines are becoming more and more realistic to get minor details of the flow, which are not possible in model testing. The inverse design technique and fully 3-dimensional flow simulations were performed early to manufacture the newly developed runner. It allows a quick and efficient improvement and optimization of turbine components. The system has been applied to the optimization of a Francis turbine runner for a turbine replacement project. In present work, 3D turbulent real flow analyses in hydraulic Francis turbine have been carried out at four guide vane opening at constant rotational speed using Ansys CFX computational fluid dynamics (CFD) software. The newly developed runner from reverse engineering and CFD results show an enhanced performance. The average values of flow parameters like velocities and flow angles at the inlet and outlet of runner, guide vane and stay vane of turbine are computed to derive flow characteristics. The aim was to analyze the flow behavior and pressure distribution to further fine-tune the whole numerical experiment to achieve the level of accuracy necessary for the concept design of a revitalized turbine. The obtained results are in good agreement with the in site experiments, especially for the characteristic curve.