Determining The Influence of Geometric Parameters of The Traction-Transportation Vehicle's Frame on Its Tractive Capacity and Energy Indicators

This paper reports results of studying the influence of geometrical parameters of the frame in a traction-transportation vehicle on its traction and energy indicators. A method for estimating the influence of geometrical parameters of the frame in a traction-transportation vehicle on its traction and energy indicators has been substantiated, based on the traction calculation of the tractor and taking into consideration the change in the distance from the hinge of the traction-transportation vehicle to the front and rear drive axles. The method makes it possible to determine the normal reactions, tangent thrust forces, and traction power on the wheels of the machine. The method reported here enables defining the optimal geometric parameters for improving the traction-adhesion and fuel-economic indicators of the traction-transportation vehicle. It was theoretically established that the normal reactions on the front wheels of the studied traction-transportation vehicle are 27,800 N and exceed by 1.95 times the normal reactions on the rear wheels of 14,200 N. This is due to the fact that the distance from the hinge to the corresponding axles of the wheels is 1.89 m and 0.97 m. Increasing the distance from the hinge to the axle of the rear wheels to 1.17 m produces a positive effect on improving the tractive performance of the traction-transportation vehicle. There is an increase in the tractive power on rear wheels to 24.39 kW. The experimental study of the traction-transportation vehicle was performed using an all-wheel-drive machine with a hinge-connected frame as an example. The maximum traction power is 121 kW, which is achieved at a speed of 12 km/h, traction efficiency of 0.68, and a thrust force per hook of 30.2 kN. The difference between the results obtained theoretically and experimentally is 8 %. Applying the method could make it possible to provide designers and manufacturers with recommendations for the construction and improvement of a traction-transportation vehicle, to improve traction and adhesion properties, and reduce the anthropogenic impact on the soil