Effect of cellulose and lignin content on pyrolysis and combustion characteristics for several types of biomass

Fundamental pyrolysis and combustion behaviors for several types of biomass are tested by a thermo-gravimetric analyzer. The main compositions of cellulose and lignin contents for several types of biomass are analyzed chemically. Based on the main composition results obtained, the experimental results for the actual biomass samples are compared with those for the simulated biomass, which is made of the mixture of the cellulose with lignin chemical. The morphological changes before and after the reactions are also observed by a scanning electron microscope. The main compositions in the biomass consisted of cellulose and lignin. The cellulose content was more than lignin for the biomass samples selected in this study. The reaction for the actual biomass samples proceeded with the two stages. The first and second stage corresponded to devolatilization and char combustion during combustion, respectively. The first stage showed rapid mass decrease caused by cellulose decomposition. At the second stage, lignin decomposed for pyrolysis and its char burned for combustion. For the biomass with higher cellulose content, the pyrolysis rate became faster. While, the biomass with higher lignin content gave slower pyrolysis rate. The cellulose and lignin content in the biomasses was one of the important parameters to evaluate the pyrolysis characteristics. The combustion characteristics for the actual biomass depends on the char morphology produced.