Fuel Characteristics of Biodiesel Produced from a High-Acid Oil from Soybean Soapstock by Supercritical-Methanol Transesterification

A supercritical methanol transesterification method was applied to produce biodiesel from the high-acid oil of soybean soapstock. The fuel properties of biodiesel produced with various molar ratios of methanol to raw oil were analyzed and compared in this experimental study. Oleic acid (C18:1), linoleic acid (C18:2), and palmitic acid (C16:0) were the three main compounds in the high-acid oil-biodiesel. The saturated fatty acid content of the high-acid oil increased significantly due to the supercritical-methanol transesterification reaction. The fuel characteristics of the resulting high-acid oil, including the specific gravity and kinematic viscosity, were also greatly improved. The saturated fatty acid content of the biodiesel produced from the high-acid oil was higher than that of biodiesel from waste cooking oil produced by the subcritical transesterification using a strongly alkaline catalyst. The high-acid oil-biodiesel that was produced with a molar ratio of methanol to raw oil of 42 had the best fuel properties, including a higher distillation temperature and cetane index and a lower kinematic viscosity and water content, among the biodiesels with different molar ratios.