Showing 1 - 10 of 32
The phase diagram for methane + water is explained, in relation to hydrate applications, such as in flow assurance and … in nature. For natural applications, the phase diagram determines the regions for hydrate formation for two- and three …” hydrate sample preparation protocols and testing. …
Persistent link: https://www.econbiz.de/10011031374
Three groups of hydrate-bearing sediment samples with/without underlying gas were prepared using a three …-dimensional middle-size reactor to investigate the favorable conditions for methane recovery from hydrate reservoir with gaseous CO2. The … experimental results indicated that hydrate reservoir with underlying free gas, high saturation of free gas and low saturation of …
Persistent link: https://www.econbiz.de/10010809300
Effects of 0.29mol% tetra-n-butyl ammonium bromide (TBAB) solution in conjunction with cyclopentane (CP) on the hydrate … induction time of the hydrate formation at the different temperature–pressure conditions. The results show that the volume of …–pressure condition. In addition, the CO2 concentration in the decomposed gas from the hydrate slurry phase reaches approximately 93mol …
Persistent link: https://www.econbiz.de/10010810726
of hydrate-bearing sediments govern the hydrate dissociation behavior and gas production process that accompany phase … conductivity of tetrahydrofuran hydrate-bearing sediments. The effects of different porosities, hydrate saturations and porous … materials on the effective thermal conductivity were investigated. The porosity and the hydrate saturation were obtained using …
Persistent link: https://www.econbiz.de/10011190968
The porous microstructure of hydrates governs the mechanical strength of the hydrate-bearing sediment. To investigate … the growth law and microstructure of hydrates in porous media, the growth process of tetrahydrofuran (THF) hydrate under … THF hydrate grows as different models under different concentration of THF solution (19%, 11.4% and 5.7% by weight) at 1 …
Persistent link: https://www.econbiz.de/10011030978
Massively-parallel classical equilibrium molecular dynamics (MD) simulations have been performed to investigate the computational performance of the Simple Point Charge (SPC) model and single-particle model of Molinero <i>et al.</i> applied to simulation of methane hydrates, using systems consisting of...
Persistent link: https://www.econbiz.de/10011031213
-derived carbon in shallow sediments overlying the hydrate bearing strata. When integrated with stable carbon isotope ratios of DIC … overlying hydrate bearing strata like those in Alaminos Canyon is critical to quantifying methane flux and estimating methane … hydrate distributions in gas hydrate bearing marine sediments. …
Persistent link: https://www.econbiz.de/10010945710
clathrate hydrates. The FPGA-based accelerator MD-GRAPE 3 was used to accelerate substantially the computation of non …
Persistent link: https://www.econbiz.de/10010675990
Hydrate formation/dissociation of natural gas in (diesel oil + water) emulsion systems containing 3 wt% anti … linearly with the increase of pressure, and decreases with the increase of water cut. There exists an initial slow hydrate … formation stage for systems with lower water cut, while rapid hydrate formation takes place and the process of the gas …
Persistent link: https://www.econbiz.de/10010676056
In this review, the intriguing, anomalous behaviour of hydrate thermal conductivity will be described, and progress in … in the development of detailed theoretical understandings of mechanisms of thermal conduction in clathrate hydrates, and …
Persistent link: https://www.econbiz.de/10010676071