A CFD (computational fluid dynamics) study for optimization of gas injector orientation for performance improvement of a dual-fuel diesel engine

A CFD (computational fluid dynamics) study was conducted on a diesel engine (7.4kW) under dual-fuel mode (diesel–CNG (compressed natural gas), and diesel–H2 (hydrogen)) for optimization of gas injector orientation (location and angle). The critical distance of gas injector between intake valve axis and injector mounting point is found to be 248.4mm, 219.3mm, and 96.8mm at 1500rpm, 1800rpm, and 5000rpm at 2bar gas injection pressure. If gas injector is mounted beyond the critical point, the injected gas fuel cannot reach completely into the engine cylinder during suction stroke that may result to power drop and high chance of backfiring due to the gas accumulation. The optimum injector angle at the optimum location is found to be 0° and 225° with reference to axis of intake manifold based on better mixture formation and higher thermal efficiency as compared to other angles. The experimental results have good agreement with simulation results as BTE (brake thermal efficiency) increased from 27.3% with 45° to 28.9% with 225° injector's angle at distance of 245mm. A methodology for optimization of gas injector orientation for better thermal efficiency is emerged from this study. This study could also be applicable to other fluids including EGR (exhaust gas recirculation).