Comparison of Labour Standards for a Greenhouse Tomato Production System: A Case Study

The development of labour standards for the single truss tomato production system is examined. Both time study and predetermined time systems, such as the Element Times for Agriculture (ETA) tables and the Maynard Operation Sequence Technique (MOST) tables, are used to determine labour standards for the operations of pruning and harvesting in a single truss tomato production system. The hypothesis is that a predetermined time system could be used to establish greenhouse labour standards, and thus replace the tedious and costly process of direct time study. Such a work measurement system would enable the setting of job standards quickly and accurately. Standardised work models will facilitate cost control of labour operations, and provide data for evaluation of labour costs within future greenhouse system designs. The data indicate that, although the pre‐determined time values varied from measured time study by around 6 per cent to over 23 per cent for pruning, the variation for harvesting ranged approximately from 3 per cent to 7 per cent. The combined results suggest that predetermined time systems can be used effectively to establish greenhouse labour standards for short cycle tasks without the loss of significant accuracy when using an absolute scale.