Development of a gas turbine performance analysis program and its application

A general-purpose performance prediction program, which can simulate various types of gas turbine such as simple, recuperative, and reheat cycle engines, has been developed. A stage-stacking method has been adopted for the compressor, and a stage-by-stage model including blade cooling has been used for the turbine. The combustor model has the capability of dealing with various types of gaseous fuels. The program has been validated through simulation of various commercial gas turbines. The simulated design performance has been in good agreement with reference data for all of the gas turbines. The average deviations of the predicted performance parameters (power output, thermal efficiency, and turbine exhaust temperature) were less than 0.5% in the design simulations. The accuracy of the simulation of off-design operation was also good. The maximum root mean square deviations of the predicted off-design performance parameters from the reference data were 0.22% and 0.44% for the two simple cycle engines, 0.22% for the recuperative cycle engine, and 0.21% for the reheat cycle engine. Both the design and off-design simulations confirmed that the component models and the program structure are quite reliable for the performance prediction of various types of gas turbine cycle over a wide range of operations.