Limitations of real-time models for forecasting river flooding from monsoon rainfall

Very intense rainfall during the southwest and northeast monsoons causes severe river flooding in India. Some traditional techniques used for real-time forecasting of flooding involve the relationship between effective rainfall and direct surface runoff, which simplifies the complex interactions between rainfall and runoff processes. There are, however, serious problems in deducing these variables in real time, so it is highly desirable to have a real-time flood forecasting model that would directly relate the observed discharge hydrograph to the observed rainfall. The storage routing model described by Baba and Hoshi (<CitationRef CitationID="CR1">1997</CitationRef>), Tanaka et al. (<CitationRef CitationID="CR4">1997</CitationRef>), and Baba et al. (<CitationRef CitationID="CR2">2000</CitationRef>), and a simplified version of this model, have been used to compute observed river discharge directly from observed hourly rainfall. This method has been used to study rainfall–runoff data of the Ajay River Basin in eastern India. Five intense rainfall events of this basin were studied. Our results showed that the Nash–Sutcliffe efficiency of discharge prediction for these five events was 98.6%, 94.3%, 86.9%, 85.6%, and 67%. The hindcast for the first two events is regarded as completely satisfactory whereas for the next two events it is deemed reasonable and for the fifth it is unsatisfactory. It seems the models will yield accurate hindcast if the rainfall is uniform over the drainage basin. When the rainfall is not uniform the performance of the model is unsatisfactory. In future this problem can, in principle, be corrected by using a weighted amount if rainfall is based upon multiple rain-gauge observations over the drainage basin. This would provide some measure of the dispersion in the rainfall. The model also seems unable to simulate flooding events with multiple peaks. Copyright Springer Science+Business Media, Inc. 2007