Tannic Acid (Ta)-Based Coating Modified Membrane Enhanced by Successive Inkjet Printing of Fe3+ and Sodium Periodate (Sp) for Efficient Oil-Water Separation

Wettability of membrane is of vital importance for treatment of oily wastewater. In recent years, hydrophilic modifications based on plant polyphenol have been widely investigated to enhance the anti-fouling property of membranes due to their mild conditions, versatility and low cost. However, there are still some problems in improving raw material utilization and hydrophilicity. Herein, a facile method was proposed to optimize tannic acid (TA)-based membrane modification process by synergistically inducing TA deposition by Fe 3+ and SP with the assistance of inkjet printing. The hydrophobicity of polyvinylidene fluoride (PVDF) membrane was converted to hydrophilicity (WCA=34.6°) and underwater oleophobicity (UOCA=144.4°) in very short time (10 min). The optimum PVDF/Fe-TA-SP 422 membrane possessed high flux (4968.4-7340.4 L·m -2 ·h -1 ·bar -1 ) for a number of oil/water emulsions with high separation efficiency (>98%), outperforming most state-of-the-art membranes for oil-water separation. Furthermore, the optimized membrane displayed not only high antifouling property and reusability with flux recovery ratio of 89.1%-98.0% after eight-cycle filtration, but also desired stability under near neutral pH conditions during long-term running. The modification strategy proposed in this study is convenient, efficient and low cost, and the prepared membranes are versatility, providing novel insights into preparation of high efficiency membranes for oily wastewater treatment